Skip to content
3-D BullsEye
The 3-D BullsEye, is an oil sight glass made of a high performance transparent polyamide, allows immediate and accurate visual oil level monitoring from virtually any angle.
WW 3
These water alarm units working on the principle of interface level measurement serve the reliable detection of free water in applications with a high rate of water penetration.
WW 6
Reliable display of interface level of oil and free water. Small reaction volume; therefore, also recommended for smaller oil tanks.
BCM-W
Water or moisture is just as much an undesired parameter in hydraulic and lubrication systems as particles and air and can cause significant system damage. The Bühler Condition Monitoring Water Sensor (BCM-W) was designed specifically to continuously monitor the water content of oil whilst also measuring the temperature.
MCS
The moisture content sensor (MCS) is suitable for most hydraulic and lubricating fluids. The high accuracy of the measurement and excellent long-term stability make the MCS ideal for online monitoring of moisture in transformer, lubricating and hydraulic fluid, as well as diesel fuel.
WSPS 05
The WSPS 05 sensor is an effective diagnostic system for determining the saturation level of water in oil. The sensor detects the presence of free or emulsified water in hydraulic or lubrication systems, thereby enabling the user to prevent accelerated oil aging, increased wear, malfunctions and failure of components. The saturation of the fluid with water displays as a percentage.
CM
The CM Terminal offers the basis for combining various CM sensors in an easy to see location. Their outputs allow compatible information networking to the master system.
BCM-MS
The BCM-MS capacitively measures the relative humidity in the medium to ensure reliable information about the saturation level of the oil.
BCM-LS
The Bühler condition monitoring liquid level sensor (BCM-LS) was designed specifically to continuously monitor the relative humidity, temperature, permittivity, conductivity and liquid level in oil tanks.
BMD
The BMD-100 is a mart sensor and based on the inductive measuring system to properly sort the ferritic particles in the respective fluid. It can distinguish between fine and coarse ferromagnetic particles.
